Monday, January 4, 2010

Rolling with the Rollers


I'll get this out of the way right up front - many triathletes and cyclists have lousy pedaling technique. It's not their fault - they got the bike, the gear, and right away started riding hard and long. Triathletes , because of the time-trial-push-a-big-gear approach that many take from the get-go are particularly bad at this. What they didn't do was take the time to develop a smooth and efficient pedal stroke - something that will make them a better and faster cyclist. Indoor bike trainers, which many are riding on at this time of the year can, depending on the unit also contribute to cycling in squares as opposed nice round circles.

What to do? Get a set of bike rollers and work roller riding into the routine. Now, many cyclists and triathletes are terrified of rollers. All they have heard are horror stories about them and what a waste of time they are. Many rollers are bought, tried once and then left to gather dust in the basement. I'll be honest - it does take a bit to get the hang of riding rollers, but if you stick with it, the rewards are significant.

Here's a few tips to get you going.

1. A road bike is "better" for riding on the rollers. However, you can use a tri-bike if you wish. The problem is that many triathletes are ill-positioned on their tri-bikes and have poor weight distribution - in short too much weight too far forward on the bike. This will make the handling of the bike on the rollers a bit squrrily. Proper tri-bike fit should not have the weight grossly shifted forward. Suggestion: Look into your fit in the off season.

2. Set the rollers up in a door-way. This way if you start to fall, you can hold yourself up by grabbing the door frame or leaning with elbows or shoulders on the sides of the door frame.

3. Get up on the bike - this can be a bit awkward, but once you are and you are clicked into your pedals, put one hand on the door frame and one on the bar( holding the top bar of a road bike just away from the stem - this is more stable). Note - the back wheel sits on the two rollers and the front wheel on the single roller on the front of the roller unit!

4. Start pedaling using a gear in the middle of your range. Keep one arm on the door jam and one of the bars and try and keep the front wheel in the middle of the front drum. At lower speeds it will wander a bit but as you build up speed . . .

5. . . .The faster you pedal and the higher the speed of both the wheels and the pedals, the more stable you will be - this is the centrifugal/gyroscopic effect at work. That being said - compared to riding on the road, it will seem like you are riding on ice!

6. Whatever you do - keep pedaling. Unless, you do come off. Then stop!

7. The moment of truth - let go of the door frame and put that hand on the handle bar tops. Look ahead - not down. See how long you can keep it going straight.

The first time will be very frustrating. You may only keep it going straight and not off to one side, for a few seconds, but keep at it. If you are well positioned in the door way, you should not go anywhere. Click out of the pedals, if you have to and set up and try it again. The learning curve for rollers is very steep, but short. Thus, it seems impossible at first, but it will come and in a much shorter time than you think - you just have to hang in there and keep trying.

Benefits: You'll figure out pretty quickly how smooth your pedal stroke is almost right away. If you have a herky-jerky pedals\stroke, you'll know - as it will seem like you are almost bucking yourself off the bike. Every little flaw in the pedal stroke is high-lighted when riding the rollers. Via your own feedback you should be able to fix some of this on your own.

Balance is key both forward and back and side to side. You quickly find out, again, that a lot of the weaving you may have been doing on the road, is due to shifting weight on the bike from side to side. Being quiet on the bike is key. The only thing that should be moving is your legs! If you are still riding in the door frame and you drift too far to one side, you can just stick an elbow out, lean on the door frame with your shoulder, or quickly and quietly put a hand out, and keep pedaling. The key is to not over-react and then get back centered again and on your way. This is a key group-ride or road racing skill - you do, from time to time, touch shoulders, elbows, even handle-bars with other riders in a pack/peleton - what causes crashes, is people panicking and OVER REACTING in this situation. If you remain calm and just focus on keeping balanced and the bike going forward, you'll be OK. Regular roller riding will give you that balance and that confidence

Roll On!

11 comments:

Unknown said...

I was taught in a narrow hallway using a full-length mirror placed 8-10 ft in front of me. Keep your eyes on an imaginary "T" on your chest.
You are right on with both your "critque" of tri-cyclists and and the benefits of riding rollers. They are one of the best things a trigeek that is serious about improving their bike split should do.
As a matter of fact.....I just blogged about it as well: http://gorillamultisport.wordpress.com/

G

Tri-James said...

I think I will pull mine out of storage - it has been a year!

Richard C. said...

Any recommendations on a set of rollers? Are they all pretty much the same?

Thanks.

Richard

SteveCl said...

Love step 6!!!

cycloscott said...

Kreitlers are the best. Aluminum cylinders and good bearings. Avoid the plastic cylinders as they can warp from heat. Don't start with a small diameter cylinder (I believe 5" is standard), smaller diameters provide more resistance. And for God's sake don't buy those silly parabolic cylinders which are supposed to keep you centered. There's a reason to ride rollers and being able to NOT work on your form is not it.

Naftali said...

I started using rollers at age 60. Set them up next to the kitchen counter and voila. Of course, my HR went through the roof, but I didi not fall. Can do up to an hour now. After a season of rollers and riding a track bike at the Velodrome, I was shocked to see how much my cadence and pedal stroke efficiency had improved.

I have two sets of rollers. A TACX Galaxie I bought used for $220 at home, and a plain brand I bought used for $60, that I keep at the Velodrome.

I am now coming back from a fractured pelvis on my left side so it's imperative that I use rollers to get my balance and pedal stroke back,

HowardGrace said...

Do you have a spam problem on this website; I also am a blogger, and I was wanting to know your situation; many of us have developed some nice procedures and we are looking to swap techniques with other folks, please shoot me an e-mail if interested. Fire Door

folding gate dan rolling door said...

This is a great inspiring article,Excellent Post as always and you have a great post and I like it thank you for sharing.
folding gate,folding gate,rolling door
rolling door otomatis,rolling door one sheet

Dedi Natadiningrat said...

Tempat Ruqyah Cirebon, Indramayu, Majalengka dan kuningan Telp: 083120122062

Ruqyah

Ruqyah Majalengka
Ruqyah Jakarta

harga marmer lokal & marmer import said...

Awesome blog! You would be a wonderful action in your article
supplier marmer
marmer lokal
marmer import

harga marmer lokal & marmer import said...

Very Nice Content I Appreciated, Keep Sharing good quality content
rolling door jakarta barat
undefined
undefined
undefined